|
Press Releases
TDK Corporation launches UWB integrated test system for UWB device
evaluation and measurement
May 27, 2005
TDK
corporation announces the availability of a total solution integrated
UWB evaluation and measurement system. Sales of this new system will
start in both Japan and the United States in June 2005. [more]
TDK
introduces the SAR-TS Specific Absorption Rate (SAR) Test System
CEDAR
PARK, TEXAS, August 1, 2002 TDK RF Solutions Inc. introduces the SAR-TS
Specific Absorption Rate (SAR) Test System, an integrated hardware and
software solution designed for measuring the
thermal effects of human exposure to RF electromagnetic fields. The
TDK SAR-TS is a turnkey solution for performing SAR measurements and is
designed for both product manufacturers and test labs. [more]
EMC
AUTOMATION BECOMES TDK RF SOLUTIONS
Cedar
Park, Texas In August
of 2001, EMC Automation becomes part of TDK RF Solutions, a newly formed
company established to address customer requirements in the rapidly
changing RF industry. TDK RF Solutions' mission is to utilize TDK's
global technical expertise and resources to become the preferred provider
of research & development, product design, test products, and test
services to the worldwide RF community. [more]
EMC
Automation Announces Dual Antenna Positioning System to Simplify Immunity
and Emissions Test Procedures
Cedar
Park, Texas EMC Automation introduces the DAPS-01 Dual Antenna
Positioning system, a computer-controlled positioner specifically designed
for remote positioning of two antennas in a fully anechoic environment.
The DAPS-01 simplifies testing by allowing test engineers to test
continuously across two antenna bandwidths without interruption, so EMC
test laboratories can realize significant time savings. The DAPS-01 system
combines a dual antenna mast, turntable, and remote system control unit to
allow antenna positioning in both in the horizontal and vertical planes
from the control room. [more]
EMC
Automation Introduces a 3-Dimensional Manipulator System for Remote
Positioning and Radiation Pattern Measurement of Equipment Under Test
Cedar
Park, Texas EMC Automation introduces the 3DM-01 3-Dimensional
Manipulator system, a hardware and software solution designed for remote
3-dimensional positioning and pattern measurement of equipment under test.
The 3DM-01 greatly simplifies EMC testing by automating measurement
procedures and positioning from the control room computer. [more]
New
Broadband Antenna for Immunity Measurements Offers Wide Frequency Range,
Excellent Performance, and Modest Size
Cedar
Park, Texas
EMC Automation introduces the LPDA-0803 Log Periodic Dipole Array
antenna for IEC-1000-4-3 radiated immunity testing. The LPDA-0803 offers
an ultra-wide operating frequency range of 80 MHz to 3 GHz and a modest
size, making it ideal for immunity measurements in small and compact
anechoic chambers. With its
broad frequency range, the LPDA-0803 can replace two antennas, improving
test efficiency by eliminating the need to change antennas mid-test.
[more]
TDK FULLY
AUTOMATIC, PROGRAMMABLE SLIDING DOOR PROVIDES EFFECTIVE RF SHIELDING AND
EASE OF OPERATION
DάSSELDORF,
GERMANY
Designed to meet the rigorous standards in EMC test environments, the
newly developed automatic sliding door from TDK provides high-level RF
protection with a unique and reliable opening and closing mechanism.
Unlike standard sliding door designs, the TDK automatic sliding door is
driven by two synchronized stepping motors. This allows automatic and
programmable operation, and smooth, vibration-free opening and closing at
both constant and variable speeds. Effective sealing and shielding is
achieved with TDK's innovative 'Zero Force' contact clamping
mechanism that imparts no excessive force to the surrounding shielded room
structure. Long term operational reliability and ease of maintenance have
been successfully achieved with this sate-of-the-art sliding door. [more]
EMC
AUTOMATION INTRODUCES PRECISION LOG PERIODIC ANTENNA FOR EMS TESTING
CEDAR PARK, TEXAS
EMC Automation has introduced the
PLP-3003 Precision Log Periodic antenna. The PLP-3003 is a new generation,
high precision compact antenna designed for EMC testing over the wide
frequency range of 300 MHz to 3 GHz. [more]
EMC
AUTOMATION OFFERS NEW LOG PERIODIC ANTENNA ARRAYS FOR IMMUNITY AND
EMISSIONS TESTING
CEDAR PARK, TEXAS
EMC Automation announces the VLA-series
of antennas, three V-Log Periodic Arrays that offer significantly improved
performance over standard log periodic antennas. The VLA-series includes the VLA-8001 (80 MHz to 1 GHz),
VLA-1001 (100 MHz to 1 GHz), and VLA-2001 (200 MHz to 1 GHz), with custom
models available to meet a specific operating frequency range of interest. [more]
EMC AUTOMATION TEAMS WITH TDK TO DELIVER
TIGHTLY INTEGRATED TURNKEY TEST FACILITIES
CEDAR PARK, TEXAS EMC Automation, a
leading supplier of turnkey systems, antennas, and products for EMC
testing, announced that it will offer the complete TDK line of fully
compliant anechoic chambers to the North American and Asian markets. EMC
Automation will work closely with TDK chamber design engineers to develop
solutions based on specific customer requirements, and will provide
technical expertise and project management to tightly integrate the test
system and anechoic chamber. With the addition of chambers to its product
offerings, EMC Automation delivers total turnkey solutions for customers
interested in building or upgrading an EMC test facility. [more]
NEW HIGH POWER HYBRID LOG ANTENNA FOR EMC
TESTING
CEDAR PARK, TEXAS EMC
Automation announces the HLP-2601 Hybrid Log Periodic antenna, a dual-mode
antenna that offers unequaled performance over the frequency range of 26
MHz to 1 GHz. The HLP-2601 is designed to meet requirements for both
radiated immunity and emissions radiated testing requiring very intense
field strengths, making it an ideal replacement for at least two antennas. [more]
NEW HIGH POWER PRECISION BICONICAL ANTENNA
CEDAR PARK, TEXAS EMC Automation
announces the HBA-2030 High Power Biconical Antenna, a new generation
biconical that covers the operating frequency range of 20 MHz to 300 MHz.
The HBA-2030's unprecedented combination of high power handling,
balance, and pattern control makes it an excellent choice for both
immunity and emissions measurements. [more]
NEW HIGH POWER BROADBAND ANTENNA FOR
IMMUNITY TESTING
CEDAR PARK, TEXAS EMC Automation
introduces the HPBA-2510 High Power Broadband Antenna, a new broadband
antenna that provides extremely high field strengths over the operating
frequency range of 25 MHz to 100 MHz. The HPBA-2510's combination of
high efficiency, low VSWR, and excellent field uniformity make it the best
choice for MIL-STD 461, SAE J1113/J551, and other immunity testing that
requires high power capability (3500W maximum). [more]
NEW PRECISION BICONICAL ANTENNA LAUNCHED
BY EMC AUTOMATION
CEDAR PARK, TEXAS EMC Automation
announces the PBA-2030 Precision Biconical Antenna, a new generation
biconical that covers the operating
frequency range of 20 MHz to 300 MHz. The PBA-2030's unprecedented
combination of power
handling, balance, and pattern control makes it an excellent choice for
both immunity and emissions measurements. [more]
NEW METROLOGY BICONICAL ANTENNA AVAILABLE
FROM EMC AUTOMATION
CEDAR PARK, TEXAS EMC
Automation announces the MBA-3060 Metrology Biconical Antenna, the newest
product in our family of metrology biconical antennas. The MBA-3060
provides superior balance and patterns over the operating frequency range
of 30 MHz to 600 MHz. The MBA-3060 features a phase imbalance of ± 1
degree maximum over the operating frequency range. [more]
NEW DUAL-MODE HYBRID LOG ANTENNA AVAILABLE
FOR IMMUNITY AND EMISSIONS TESTING
CEDAR PARK, TEXAS EMC
Automation announces the HLP-2603 Hybrid Log Periodic antenna, a dual-mode
antenna that offers unequaled performance over the ultra-wide frequency
range of 26 MHz to 3 GHz. The HLP-2603 is designed to meet requirements
for both radiated emissions and radiated immunity testing, making it an
ideal replacement for at least two antennas. [more]
EMC AUTOMATION ANNOUNCES EMC TEST
INTERFACE
CEDAR PARK, TEXAS, December 17, 1999 EMC Automation
announces the ETI-350 EMC Test Interface, a multi-purpose
microprocessor-based instrument designed to function as the central
control unit for EMC tests. The ETI-350's resident Windows-based Pentium
II system performs power monitoring, field monitoring, RF switching, and
computer control. Combined with a signal generator and an amplifier, the
ETI-350 provides a complete EMS testing solution. In addition, the ETI-350
can function as a controller to handle complex EMI measurements when
connected to a receiver and associated accessories. [more]
EMC AUTOMATION ANNOUNCES COLOR
VIDEO CAMERA FOR EMC TESTING
CEDAR PARK, TEXAS, December 15, 1999 EMC Automation
announces the VC-04 Color Video Camera, a high performance CCD
specifically designed from remote monitoring of equipment under test in an
anechoic chamber or shielded room. The VC-04 camera system includes the
SI-300/CC, a dedicated camera control interface that permits remote
control for the camera's pan, tilt, zoom, focus, and iris control. The
VC-04 features six preset positions for zoom and focus, automatic and
manual iris control, and camera ID character generation. Options are
available for audio monitoring, and computer control via the GPIB
(IEEE-488) bus. [more]
EMC AUTOMATION ANNOUNCES NEXT
GENERATION SYSTEM CONTROLLER
CEDAR PARK, TEXAS, December 13, 1999 EMC Automation
announces the SI-300 System Interface, a multi-purpose system controller
designed specifically for manual or remote computer control of EMC test
systems. The SI-300 provides a user-friendly method for controlling up to
four devices, including field sensors, turntables, antenna masts and x-y
positioners, probe positioners, RF switch modules, and the EMC Automation
line of color video cameras. The SI-300 features GPIB control for front
panel functions, noise-free fiber optic links, a bright 240 x 64 backlit
LCD, and easy to operate ergonomic controls. [more]
TDK
ACQUIRES EMC AUTOMATION INC.
PORT WASHINGTON, NY, October 5, 1998 - TDK U.S.A. Corporation (TUC)
today announced the acquisition of EMC Automation Inc., a leader in the
design and manufacture of test systems used for electronic noise
measurements. EMC Automation Inc., based in Austin, TX, will be operated
as a wholly owned subsidiary of TUC. [more]
|
|
Trade Shows & Events
TDK RF Solutions will exhibit its
products, including our industry-leading antennas, top-performing TDK
absorbers, and TDK TestLab software at regional EMC exhibitions and
international events.
|
